© 2018 Zhangjiagang Hengyu Machinery Co.,LTD All rights reserved. Designed by iwonder.cn Site Map
Email: info@hengyu-machinery.com
Email: info@hengyu-machinery.com
Either you use a fully automatic or semi-automatic carbonated beverage filling machine; you have to focus on its maintenance. Many problems can occur in the equipment when you will use it. It is imperative to go for the suitable maintenance for the machine to keep it in running and accurate position.
When you will use carbonated can filling machine, then you need to monitor its filling accuracy. It is the main factor in the use of the filling equipment and a precondition for making certain the product quality. Thus, it is essential to do the adjustment of the filling machine. You can do it in three steps. We are going to mention them as follows.
The filling error generation is checked by the amount and speed of the filling. It could also be determined through the closing and opening speed of the lower and upper valves. The changing speed of the lower and upper valves is linked to the product’s viscosity. If the viscosity will be higher, then changing the speed of the valves will be slower.
The filling error generation is checked by the amount and speed of the filling. It could also be determined through the closing and opening speed of the lower and upper valves. The changing speed of the lower and upper valves is linked to the product’s viscosity. If the viscosity will be higher, then changing the speed of the valves will be slower.
The second step you have to do is to adjust the valve’s spring pressure. You can check the pressure through the trial filling. Also, you have to hire a professional operator.
The final step you have to do is to check the speed of the valve. After that, it is imperative to adjust the spring speed of the valve. Always remember when the spring pressure will increase, then the valve will open and close rapidly.
The carbonated drinks filling machine is the advanced version of the filling machine. For that reason, attention must be paid to the related machine’s maintenance. Throughout the maintenance method, you have to focus on the operating details. Firstly, the equipment is set without power. After that, the normal gas source is provided.
During the assembly and cleaning method of the machine, it is important not to rinse it with water. If the nozzle of the filling equipment overflows then you have to press the emergency stop button. You should not plug or unplug the circuit device. In this way, you will be safe from the electric shock.
Throughout the carbonated beverage can filling machine operation, the improper or poor operation can fail the cylinder. You can overcome this issue by resetting the equipment. However, there are diverse problems that can occur while using the equipment. You can know about these problems from the troubleshooting guide. So, always get a guide from the manufacturers when you purchase this filling equipment.